U12-0.75V 95A Fluorocarbon U-Seal | 3/4 in ID 1/8 in CS
SKU:
U12-0.75V
U12-0.75V 95A Fluorocarbon U-Seal | 3/4 in ID 1/8 in CS
Utilizing the same profiles as the Style 800 Polyurethane U-Seal line, these u-seals are molded from a fluorocarbon, compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate, continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer, to the fluid compatibility chart in the appendix or contact our Engineering Department.
$21.22 / EA
95A Durometer | Fluorocarbon Material | 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal
Export To PDF
Item Specifications
-
Symmetrical
-
1 Inch
-
+0.002, +0.000
-
1/8 Inch
-
95A
-
0.75 Inch
-
+0.000, -0.002
-
0.138 Inch
-
+0.015, +0.000
-
1 Inch
-
+0.002, +0.000
-
Loaded
-
Fluorocarbon
-
400 °F
-
-20 °F
-
1/8 Inch
-
3/4 Inch
-
1 Inch
-
0.999 Inch
-
+0.000, -0.001
-
0 to 2000 psi
-
0.75 Inch
-
+0.000, -0.001
-
Unlimited
-
3 ft/sec
-
800
-
0.751 Inch
-
+0.002, +0.000
-
inch
-
0.00 lbs per EA
