Seal Tools, Adapters & Kits | CRC Distribution
Search in Category
Filter Your Search
Category Group
Durometer
Material
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
SET SCREW KIT – INCH 12 / 150 PIECE
ROD SEAL INSTALLATION TOOL 70-165mm
FOR 4-BOLT SPLIT FLANGE CONNECTORS – Flange seals are a one piece dual durometer urethane static seal. The black outer part is a tough, extrusion-resistant 95 Durometer urethane, and the yellow inner layer is 57 Durometer with low compression set and excellent sealing properties. These seals are a direct replacement for o-rings and do not require modification to any split flange groove. For SAE J518 4-bolt Code 61/62 Split Flanges.
95 Durometer | Urethane Material | 2 1/4 in Nominal Inner Diameter | 0.115 in Cross Section | Split Flange Seal
FOR 4-BOLT SPLIT FLANGE CONNECTORS – Flange seals are a one piece dual durometer urethane static seal. The black outer part is a tough, extrusion-resistant 95 Durometer urethane, and the yellow inner layer is 57 Durometer with low compression set and excellent sealing properties. These seals are a direct replacement for o-rings and do not require modification to any split flange groove. For SAE J518 4-bolt Code 61/62 Split Flanges.
95 Durometer | Urethane Material | 2 3/4 in Nominal Inner Diameter | 0.115 in Cross Section | Split Flange Seal
FOR 4-BOLT SPLIT FLANGE CONNECTORS – Flange seals are a one piece dual durometer urethane static seal. The black outer part is a tough, extrusion-resistant 95 Durometer urethane, and the yellow inner layer is 57 Durometer with low compression set and excellent sealing properties. These seals are a direct replacement for o-rings and do not require modification to any split flange groove. For SAE J518 4-bolt Code 61/62 Split Flanges.
95 Durometer | Urethane Material | 3 3/8 in Nominal Inner Diameter | 0.115 in Cross Section | Split Flange Seal
FOR 4-BOLT SPLIT FLANGE CONNECTORS – Flange seals are a one piece dual durometer urethane static seal. The black outer part is a tough, extrusion-resistant 95 Durometer urethane, and the yellow inner layer is 57 Durometer with low compression set and excellent sealing properties. These seals are a direct replacement for o-rings and do not require modification to any split flange groove. For SAE J518 4-bolt Code 61/62 Split Flanges.
95 Durometer | Urethane Material | 3/4 in Nominal Inner Diameter | 0.115 in Cross Section | Split Flange Seal
DIGITAL CALIPER 6 FRACTION
