Seal Tools, Adapters & Kits | CRC Distribution

Molded in 92A urethane, this seal was developed to replace an o-ring in SAE J518 code 61/62 split flange applications.

92A Durometer | Urethane Material | 2 1/4 in Nominal Inner Diameter | Split Flange Seal

PISTON SEAL REFORM TOOL 50 to 250mm

SEAL LUBE-O-RING LUBE

PISTON SEAL STRETCHER PLUS HANDLE

TOOL ASSORTMENT KIT

Split Flange Seal Kit

FOR 4-BOLT SPLIT FLANGE CONNECTORS – Flange seals are a one piece dual durometer urethane static seal. The black outer part is a tough, extrusion-resistant 95 Durometer urethane, and the yellow inner layer is 57 Durometer with low compression set and excellent sealing properties. These seals are a direct replacement for o-rings and do not require modification to any split flange groove. For SAE J518 4-bolt Code 61/62 Split Flanges.

95 Durometer | Urethane Material | 1 in Nominal Inner Diameter | 0.115 in Cross Section | Split Flange Seal

FOR 4-BOLT SPLIT FLANGE CONNECTORS – Flange seals are a one piece dual durometer urethane static seal. The black outer part is a tough, extrusion-resistant 95 Durometer urethane, and the yellow inner layer is 57 Durometer with low compression set and excellent sealing properties. These seals are a direct replacement for o-rings and do not require modification to any split flange groove. For SAE J518 4-bolt Code 61/62 Split Flanges.

95 Durometer | Urethane Material | 1 5/16 in Nominal Inner Diameter | 0.115 in Cross Section | Split Flange Seal

FOR 4-BOLT SPLIT FLANGE CONNECTORS – Flange seals are a one piece dual durometer urethane static seal. The black outer part is a tough, extrusion-resistant 95 Durometer urethane, and the yellow inner layer is 57 Durometer with low compression set and excellent sealing properties. These seals are a direct replacement for o-rings and do not require modification to any split flange groove. For SAE J518 4-bolt Code 61/62 Split Flanges.

95 Durometer | Urethane Material | 1 1/2 in Nominal Inner Diameter | 0.115 in Cross Section | Split Flange Seal

FOR 4-BOLT SPLIT FLANGE CONNECTORS – Flange seals are a one piece dual durometer urethane static seal. The black outer part is a tough, extrusion-resistant 95 Durometer urethane, and the yellow inner layer is 57 Durometer with low compression set and excellent sealing properties. These seals are a direct replacement for o-rings and do not require modification to any split flange groove. For SAE J518 4-bolt Code 61/62 Split Flanges.

95 Durometer | Urethane Material | 1 7/8 in Nominal Inner Diameter | 0.115 in Cross Section | Split Flange Seal