U-seals, Polypaks, U-cups

US-90URE-1-3/4×2×1/4

US-90URE-1-3/4×2×1/4

US-90URE-1-3/4×2×1/8

Utilizing the same profiles as the Style 800 Polyurethane U-Seal line, these u-seals are molded from a fluorocarbon, compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate, continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer, to the fluid compatibility chart in the appendix or contact our Engineering Department.

95A Durometer | Fluorocarbon Material | 1 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

US-90URE-1-7/8×2-1/8×1/8

US-90URE-2×2-1/4×1/8

125-02.000-25BU2145

US-90URE-2×2-1/4×1/4

Utilizing the same profiles as the Style 800 Polyurethane U-Seal line, these u-seals are molded from a fluorocarbon, compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate, continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer, to the fluid compatibility chart in the appendix or contact our Engineering Department.

95A Durometer | Fluorocarbon Material | 2 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

US-90URE-2-1/8×2-3/8×1/8