U-seals, Polypaks, U-cups

Style RU9 seals are molded from MDI based Zurcon® Z25 urethane. This seal offers good elasticity with low, compression set while maintaining a high level of tribological characteristics. The dynamic seal lip incorporates slide, segments that will increase back-pumping capabilities while reducing friction. The RU9 style rod seal is ideal for, hydraulic applications where high temperature and high pressure performance is required.

95A Durometer | Urethane Material | 1 5/8 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

Style RU9 seals are molded from MDI based Zurcon® Z25 urethane. This seal offers good elasticity with low, compression set while maintaining a high level of tribological characteristics. The dynamic seal lip incorporates slide, segments that will increase back-pumping capabilities while reducing friction. The RU9 style rod seal is ideal for, hydraulic applications where high temperature and high pressure performance is required.

95A Durometer | Urethane Material | 3 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

RUS-95URE-3.250×3.750×0.375

RUS-95URE-3.375×3.875×0.375

Style RU9 seals are molded from MDI based Zurcon® Z25 urethane. This seal offers good elasticity with low, compression set while maintaining a high level of tribological characteristics. The dynamic seal lip incorporates slide, segments that will increase back-pumping capabilities while reducing friction. The RU9 style rod seal is ideal for, hydraulic applications where high temperature and high pressure performance is required.

95A Durometer | Urethane Material | 3 3/4 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

Style RU9 seals are molded from MDI based Zurcon® Z25 urethane. This seal offers good elasticity with low, compression set while maintaining a high level of tribological characteristics. The dynamic seal lip incorporates slide, segments that will increase back-pumping capabilities while reducing friction. The RU9 style rod seal is ideal for, hydraulic applications where high temperature and high pressure performance is required.

95A Durometer | Urethane Material | 4 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

US-90URE-5-1/2×6×9/16

RUS-90URE-10.500×11.187×0.375

US-90URE-2-1/2×3-1/8×3/8

US-90URE-10×12×1