U-seals, Polypaks, U-cups

US-90URE-2×2-1/2×1/4

US-90URE-2-3/4×3-1/4×1/4

US-90URE-3×3-1/2×1/4

US-90URE-7-3/4×8-1/4×1/4

US-90URE-3×3-5/8×1/2

Utilizing the same profiles as the Style 800 Polyurethane U-Seal line, these u-seals are molded from a fluorocarbon, compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate, continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer, to the fluid compatibility chart in the appendix or contact our Engineering Department.

95A Durometer | Fluorocarbon Material | 1 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

US-90URE-9×10×3/4

US-90URE-1-1/8×1-1/2×3/8

US-90URE-1-5/8×2×3/8

These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum, life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability, and, prevents air and contaminants from entering the cylinder.

92A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter | 5/16 in Cross Section | U-Seal

Features

• General purpose rod seal
• Robust design
• Excellent wear resistance
• Increase seal stability
• Performs well over wide temperature range and is extremely effective in low temperatures
• Primary lip protection
• Easy to install