U-seals, Polypaks, U-cups

US-90URE-1-3/8×1-3/4×5/16

US-90URE-2×2-3/8×3/8

US-90URE-2-5/8×3×1/4

Utilizing the same profiles as the Style 800 Polyurethane U-Seal line, these u-seals are molded from a fluorocarbon, compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate, continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer, to the fluid compatibility chart in the appendix or contact our Engineering Department.

95A Durometer | Fluorocarbon Material | 2 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

US-90URE-3-1/2×4×3/8

US-90URE-4×4-1/2×1/2

US-90URE-4×4-1/2×1/4

US-90URE-4-1/2×5×5/16

Utilizing the same profiles as the Style 800 Polyurethane U-Seal line, these u-seals are molded from a fluorocarbon, compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate, continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer, to the fluid compatibility chart in the appendix or contact our Engineering Department.

95A Durometer | Fluorocarbon Material | 4 in Nominal Inner Diameter | 3/8 in Cross Section | U-Seal

Specifically designed as piston seals, these u-seals are engineered to seal on their outside diameter. They offer extended, service life and maximum reliability in piston sealing.

92A Durometer | Urethane Material | 7 1/4 in Nominal Inner Diameter | 3/8 in Cross Section | U-Seal