U-seals, Polypaks, U-cups

Molded in a tough urethane, this seal employs an additional lip near the heel. The twin lip design provides stability, friction-reducing lube retention, and some contaminant resistance. VME – Secondary lip is further from heel than standard MRTU. NOTE: E = European Urethane.

Urethane Material | 35 MM Nominal Inner Diameter | Rod U-Seal

Features

• Excellent low temperature performance
• Easy installation

Utilizing tough polyurethane, these seals possess excellent wear and abrasion resistance. Symmetrical in design, they can be used in rod or piston applications. E= European Urethane.

Urethane Material | 30 MM Nominal Inner Diameter | U-Seal

Molded from tough polyurethane material, these seals offer high resistance to wear and abrasion. Energized with a four-lobed ring, they have greatly increased low pressure performance.

Urethane Material | 40 MM Nominal Inner Diameter | U-Seal

US-90URE-1-1/4×1-1/2×3/16

US-90URE-1-3/4×2-1/8×3/16

US-90URE-1-1/2×2×5/16

US-90URE-4×4-1/2×3/8

Molded in a tough urethane, this rod u-seal fits tightly in the groove while providing increased radial force on the rod.

Urethane Material | 30 MM Nominal Inner Diameter | Rod U-Seal

Used as a companion to our “B” lip configured Style 850 u-seal, Style 855 PRC rings convert a uni-directional u-seal into a bi-directional seal.

95A Durometer | Urethane Material | 3 in Nominal Inner Diameter | 1/4 in Cross Section | Ring

US-90NBR-3-1/2×4×1/4