Backup Rings
Search in Category
Filter Your Search
Category Group
Material
Nominal Cross Section
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.
PTFE Material | 104 MM Nominal Inner Diameter | 2.6 MM Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.
PTFE Material | 105 MM Nominal Inner Diameter | 2.5 MM Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Filled PTFE back-up rings primarily used with U-seals.
Glass Filled PTFE Material | 105 MM Nominal Inner Diameter | 7.5 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Filled PTFE back-up rings primarily used with U-seals.
Bronze Filled PTFE Material | 105 MM Nominal Inner Diameter | 7.5 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.
PTFE Material | 109.7 MM Nominal Inner Diameter | 2.5 MM Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.
PTFE Material | 10 MM Nominal Inner Diameter | 1.5 MM Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Filled PTFE back-up rings primarily used with U-seals.
Bronze Filled PTFE Material | 10 MM Nominal Inner Diameter | 5 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.
PTFE Material | 11.8 MM Nominal Inner Diameter | 2.1 MM Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Filled PTFE back-up rings primarily used with U-seals.
Bronze Filled PTFE Material | 110 MM Nominal Inner Diameter | 10 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Filled PTFE back-up rings primarily used with U-seals.
Bronze Filled PTFE Material | 110 MM Nominal Inner Diameter | 7.5 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
