Backup Rings
Search in Category
Filter Your Search
Category Group
Material
Nominal Cross Section
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
Hard nylon back-up rings for use with U-seals.
Nylon Material | 80 MM Nominal Inner Diameter | 5 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Hard nylon back-up rings for use with U-seals.
Nylon Material | 80 MM Nominal Inner Diameter | 6.5 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Hard nylon back-up rings for use with U-seals.
Nylon Material | 80 MM Nominal Inner Diameter | 7.5 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Hard nylon back-up rings for use with U-seals.
Nylon Material | 85 MM Nominal Inner Diameter | 10 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Hard nylon back-up rings for use with U-seals.
Nylon Material | 85 MM Nominal Inner Diameter | 7.5 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Hard nylon back-up rings for use with U-seals.
Nylon Material | 95 MM Nominal Inner Diameter | 10 MM Cross Section | U-Seal Back-Up Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 95 MM Nominal Inner Diameter | Piston Seal
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 100 MM Nominal Inner Diameter | Piston Seal
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 105 MM Nominal Inner Diameter | Piston Seal
