Browse Categories

Wipers

Filter Your Search

Show Attribute Nominal Height
Show Attribute Nominal Inner Diameter
Show Attribute Nominal Outer Diameter
Hide Attribute Unit of Measure

Shop by Category

Loading...
RCW-90URE-63x77x8 - MCW-63X77X8 | CRC Distribution Inc.

This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.

Urethane Material | 63 MM Nominal Inner Diameter | Wiper

$14.67
/EA

This wiper is molded from high grade urethane and bonded to a carbon steel case in a single lip design.

Urethane Material | 35 MM Nominal Inner Diameter | Wiper

$27.38
/EA
Urethane Wiper | CRC Distribution Inc.

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 5 1/2 in Nominal Inner Diameter

Features

  • Flexible, snap-in design for easy installation into closed housings
  • Low compression set

$8.85
/EA

Rubber Material | 1 7/8 in Nominal Inner Diameter | Wiper

Rubber Material | 1 7/8 in Nominal Inner Diameter | Wiper

$9.86
/EA
RW-90URE-32x40x4 - MSWP-32X40X4 | CRC Distribution Inc.

This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.

Urethane Material | 32 MM Inner Diameter | Wiper

$8.54
/EA
RW-90URE-36x44x4 - MSWP-36X44X4 | CRC Distribution Inc.

This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.

Urethane Material | 36 MM Inner Diameter | Wiper

$8.81
/EA

Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.

94A Durometer | Urethane Material | 7/8 in Nominal Inner Diameter

Features

  • Crush lip to provide extra interference
  • Bead on the shoulder to keep contaminants out
  • Ribbed ID to prevent pressure traps

$2.52
/EA

Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.

92A Durometer | Urethane Material | 1 1/8 in Nominal Inner Diameter

Features

  • Used in Heavy Duty U-seals
  • Capable of surviving hostile environments
  • Molded from the high performance urethane

$13.01
/EA

Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.

92A Durometer | Urethane Material | 1 7/8 in Nominal Inner Diameter

Features

  • Used in Heavy Duty U-seals
  • Capable of surviving hostile environments
  • Molded from the high performance urethane

$30.95
/EA

Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.

94A Durometer | Urethane Material | 6 1/2 in Nominal Inner Diameter

Features

  • Crush lip to provide extra interference
  • Bead on the shoulder to keep contaminants out
  • Ribbed ID to prevent pressure traps

$33.13
/EA
  • « PREV
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • NEXT »
Seals/Wipers