Search Results
Search Filters
-
Honed Tube x
Filter Your Search
Inside Diameter
Material
Outside Diameter
Unit of Measure
Wall Thickness
Shop by Category
MHT-60X77 has a wall thickness of 8.5 mm. The ID is 60 mm and the OD is 77 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $4.29 |
| 15-74 | $3.33 |
| 75-104 | $3.00 |
| 105+ | $2.73 |
MHT-130X153 has a wall thickness of 11.5 mm. The ID is 130 mm and the OD is 153 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $17.04 |
| 15-44 | $13.23 |
| 45-104 | $11.92 |
| 105+ | $10.84 |
HT-4500X3750 has a wall thickness of 0.375 in. The ID is 3.75 in and the OD is 4.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $8.49 |
| 15-59 | $7.42 |
| 60-104 | $6.59 |
| 105-149 | $5.93 |
| 150+ | $5.40 |
HT-9000X8250 has a wall thickness of 0.375 in. The ID is 8.25 in and the OD is 9 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $17.72 |
| 15-59 | $15.49 |
| 60-89 | $13.75 |
| 90+ | $12.39 |
HT-5500X4500 has a wall thickness of 0.5 in. The ID is 4.5 in and the OD is 5.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $13.67 |
| 15-59 | $11.95 |
| 60-119 | $10.61 |
| 120+ | $9.56 |
HT-7500X6500 has a wall thickness of 0.5 in. The ID is 6.5 in and the OD is 7.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $20.35 |
| 15-59 | $17.79 |
| 60-89 | $15.80 |
| 90+ | $14.23 |
HT-9500X8000 has a wall thickness of 0.75 in. The ID is 8 in and the OD is 9.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $42.50 |
| 15-59 | $37.74 |
| 60-89 | $34.00 |
| 90+ | $30.94 |
MHT-105X127 has a wall thickness of 11 mm. The ID is 105 mm and the OD is 127 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
HT-8500X7000 has a wall thickness of 0.75 in. The ID is 7 in and the OD is 8.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $50.77 |
| 15-59 | $44.38 |
| 60-89 | $39.41 |
| 90+ | $35.50 |
HT-9500X8500 has a wall thickness of 0.5 in. The ID is 8.5 in and the OD is 9.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $28.13 |
| 15-59 | $24.98 |
| 60-89 | $22.50 |
| 90+ | $20.48 |
