Search Results
Search Filters
-
Honed Tube x
Filter Your Search
Inside Diameter
Material
Outside Diameter
Unit of Measure
Wall Thickness
Shop by Category
MHT-45X57 has a wall thickness of 6 mm. The ID is 45 mm and the OD is 57 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.64 |
| 15-74 | $5.93 |
| 75-104 | $5.34 |
| 105+ | $4.86 |
MHT-120X140 has a wall thickness of 10 mm. The ID is 120 mm and the OD is 140 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $14.07 |
| 15-44 | $10.92 |
| 45-104 | $9.84 |
| 105+ | $8.95 |
MHT-55X2.750 has a wall thickness of 7.425 mm. The ID is 55 mm and the OD is 69.85 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $10.01 |
| 15-74 | $7.77 |
| 75-104 | $7.00 |
| 105+ | $6.37 |
HT-7750X7000 has a wall thickness of 0.375 in. The ID is 7 in and the OD is 7.75 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $15.02 |
| 15-59 | $13.13 |
| 60-89 | $11.66 |
| 90+ | $10.50 |
HT-4000X3000 has a wall thickness of 0.5 in. The ID is 3 in and the OD is 4 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $11.17 |
| 15-59 | $9.59 |
| 60-104 | $8.39 |
| 105-149 | $7.45 |
| 150+ | $6.71 |
HT-7000X6000 has a wall thickness of 0.5 in. The ID is 6 in and the OD is 7 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $17.77 |
| 15-59 | $15.53 |
| 60-89 | $13.79 |
| 90+ | $12.43 |
HT-3000X2000 has a wall thickness of 0.5 in. The ID is 2 in and the OD is 3 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $8.14 |
| 15-59 | $6.99 |
| 60-104 | $6.11 |
| 105-149 | $5.43 |
| 150+ | $4.89 |
HT-6500X5500 has a wall thickness of 0.5 in. The ID is 5.5 in and the OD is 6.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $16.42 |
| 15-59 | $14.35 |
| 60-104 | $12.74 |
| 105+ | $11.48 |
MHT-70X80 has a wall thickness of 5 mm. The ID is 70 mm and the OD is 80 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $3.86 |
| 15-74 | $3.00 |
| 75-104 | $2.70 |
| 105+ | $2.46 |
MHT-95X115 has a wall thickness of 10 mm. The ID is 95 mm and the OD is 115 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $13.05 |
| 15-44 | $10.13 |
| 45-104 | $9.12 |
| 105+ | $8.30 |
