Search Results
Search Filters
-
Honed Tube x
Filter Your Search
Inside Diameter
Material
Outside Diameter
Unit of Measure
Wall Thickness
Shop by Category
HT-1875X1500 has a wall thickness of 0.1875 in. The ID is 1.5 in and the OD is 1.875 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $4.66 |
| 15-59 | $3.50 |
| 60+ | $2.80 |
MHT-100X115 has a wall thickness of 7.5 mm. The ID is 100 mm and the OD is 115 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $9.09 |
| 15-44 | $7.05 |
| 45-104 | $6.36 |
| 105+ | $5.78 |
HT-2750X2250 has a wall thickness of 0.25 in. The ID is 2.25 in and the OD is 2.75 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $4.50 |
| 15-59 | $3.87 |
| 60-104 | $3.38 |
| 105-149 | $3.00 |
| 150+ | $2.71 |
HT-4375X4000 has a wall thickness of 0.1875 in. The ID is 4 in and the OD is 4.375 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.07 |
| 15-59 | $4.35 |
| 60-104 | $3.80 |
| 105-149 | $3.38 |
| 150+ | $3.04 |
HT-5000X4000 has a wall thickness of 0.5 in. The ID is 4 in and the OD is 5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $14.32 |
| 15-29 | $12.30 |
| 30-59 | $10.75 |
| 60-89 | $9.55 |
| 90+ | $8.60 |
MHT-110X134 has a wall thickness of 12 mm. The ID is 110 mm and the OD is 134 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $14.49 |
| 15-44 | $11.25 |
| 45-104 | $10.13 |
| 105+ | $9.22 |
MHT-125X147 has a wall thickness of 11 mm. The ID is 125 mm and the OD is 147 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $17.41 |
| 15-44 | $13.51 |
| 45-104 | $12.17 |
| 105+ | $11.08 |
MHT-80X95 has a wall thickness of 7.5 mm. The ID is 80 mm and the OD is 95 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.10 |
| 15-74 | $5.51 |
| 75-104 | $4.97 |
| 105+ | $4.52 |
MHT-160X190 has a wall thickness of 15 mm. The ID is 160 mm and the OD is 190 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $19.73 |
| 15-44 | $15.31 |
| 45-104 | $13.79 |
| 105+ | $12.55 |
HT-3250X2750 has a wall thickness of 0.25 in. The ID is 2.75 in and the OD is 3.25 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.33 |
| 15-59 | $4.58 |
| 60-104 | $4.00 |
| 105-149 | $3.55 |
| 150+ | $3.20 |
