Search Results
Filter Your Search
Category Group
Shop by Category
Parback® backup ring with a curved cross-section.
Parbaks are contoured on one face to minimize distortion of the o-ring when under pressure. Parbaks should be installed with the contoured face against the o-ring, but reversal does no harm.
90A Durometer | Buna-N Rubber Material | 5 1/8 in Nominal Inner Diameter | 1/8 in Cross Section | Backup Ring
Features
- Excellent extrusion resistance
- Easily stretched for installation
- Lubrication is enhanced by rubber which absorbs system fluid and does not plate out on rubbing surfaces
Parback® backup ring with a curved cross-section.
Parbaks are contoured on one face to minimize distortion of the o-ring when under pressure. Parbaks should be installed with the contoured face against the o-ring, but reversal does no harm.
90A Durometer | Buna-N Rubber Material | 2 3/4 in Nominal Inner Diameter | 3/16 in Cross Section | Backup Ring
Features
- Excellent extrusion resistance
- Easily stretched for installation
- Lubrication is enhanced by rubber which absorbs system fluid and does not plate out on rubbing surfaces
Parback® backup ring with a curved cross-section.
Parbaks are contoured on one face to minimize distortion of the o-ring when under pressure. Parbaks should be installed with the contoured face against the o-ring, but reversal does no harm.
90A Durometer | Buna-N Rubber Material | 5 in Nominal Inner Diameter | 3/16 in Cross Section | Backup Ring
Features
- Excellent extrusion resistance
- Easily stretched for installation
- Lubrication is enhanced by rubber which absorbs system fluid and does not plate out on rubbing surfaces
Used interchangeably for piston or rod sealing, these u-seals employ the same tough urethane material found in our, Heavy Duty Rod and Piston U-Seals.
92A Durometer | Urethane Material | 1 3/8 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal
Used interchangeably for piston or rod sealing, these u-seals employ the same tough urethane material found in our, Heavy Duty Rod and Piston U-Seals.
92A Durometer | Urethane Material | 2 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal
JIC 1000X095 has a 1 in in OD and a 0.095 in in thick wall.
JIC tubing is sold in 20 ft. lengths only. Tubes can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.
Cold drawn and annealed seamless low carbon steel. This tubing is intended for use as hydraulic lines and in other applications requiring flaring and bending.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
JIC 0750 X.049 has a 0.75 in in OD and a 0.049 in in thick wall.
JIC tubing is sold in 20 ft. lengths only. Tubes can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.
Cold drawn and annealed seamless low carbon steel. This tubing is intended for use as hydraulic lines and in other applications requiring flaring and bending.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.
Bronze Filled PTFE Material | 1 1/4 in Nominal Inner Diameter | Buffer Seal
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.
Bronze Filled PTFE Material | 2 3/4 in Nominal Inner Diameter | Buffer Seal
