Search Results

Utilizing a double lip of urethane bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.

Urethane Material | 70 MM Nominal Inner Diameter | Wiper

This capped piston seal consists of a filled PTFE cap, a T-shaped NBR energizer, and two split nylon backup rings. It exhibits low friction, high sealability, and excellent resistance to extrusion and wear.

PTFE Material | 48 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.

70A Durometer | Filled PTFE Buffer Material | 25 MM Nominal Inner Diameter | Buffer Seal

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

0.693 in Nominal Inner Diameter | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.

1.503 in Nominal Inner Diameter | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

WBS, 0.125 X 0.625 Wear Strip POLYRESIN

OR-70NBR- 3/32 X 7/32 X 1/16

O-ring

O-Ring

Black Viton o-ring

75 Durometer | Black Fluorocarbon Material | 3/16 in Nominal Inner Diameter | 1/16 in Cross Section | O-Ring

Features

• Chemical resistance
• Temperature range of -20 °F to 400 °F
• Pressure range varies according to diametral clearance

O-ring

90 Durometer | O-Ring