Search Results
Filter Your Search
Category Group
Shop by Category
4 1/8 X 4 3/8 Back-up SOLID PTFE
Solid Urethane backup ring with a flat cross-section.
95A Durometer | Urethane Material | 2 1/4 in Nominal Inner Diameter | 3/16 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Solid Teflon backup ring with a flat cross-section.
PTFE can withstand high temperatures and is compatible with nearly all fluids.
PTFE Material | 6 in Nominal Inner Diameter | 3/16 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
- Deals very well with surface wear
Solid Teflon backup ring with a flat cross-section.
PTFE can withstand high temperatures and is compatible with nearly all fluids.
PTFE Material | 6 1/2 in Nominal Inner Diameter | 3/16 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
- Deals very well with surface wear
CIHT1750X1500 has a wall thickness of 0.125 in. The ID is 1.5 in and the OD is 1.75 in. The material is 1026 Carbon Steel with chrome plating on the Inside Surface.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $16.76 |
| 15-29 | $11.98 |
| 30-74 | $9.30 |
| 75+ | $8.38 |
CIHT3250X3000 has a wall thickness of 0.125 in. The ID is 3 in and the OD is 3.25 in. The material is 1026 Carbon Steel with chrome plating on the Inside Surface.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $8.00 |
| 15-29 | $5.72 |
| 30-74 | $4.44 |
| 75+ | $4.00 |
CIHT8475X8000 has a wall thickness of 0.2375 in. The ID is 8 in and the OD is 8.475 in. The material is 1026 Carbon Steel with chrome plating on the Inside Surface.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $17.80 |
| 15-74 | $15.81 |
| 75-104 | $14.24 |
| 105+ | $12.96 |
Wear rings provide a hard-wearing surface that protects the cylinder walls and the piston rod from scoring and abrasion. By maintaining alignment and reducing side loads, these rings facilitate smoother piston movement and lower friction levels.
Nylon Material | 1 in Nominal Inner Diameter | 1/8 in Cross Section | Wear Ring
Features
- Protection Against Wear
- Reduced Friction
- Extended Cylinder Life
- Operational Efficiency
