Search Results
Filter Your Search
Shop by Category
OP-40100100A has been machined to fit a 4 in cylinder bore and has a 1 in rod hole. The piston length is 1 in.
Piston is designed for an o-ring seal.
Matching seal kit is available.
Hercules® Sealing Products is pleased to introduce our new line of PowerbandTM tight tolerance premium wearrings. Manufactured from a highly engineered blend of premium nylon, glass fiber, and PTFE, PowerbandsTM offer a high strength wear-ring for all cylinder applications, including those with minimal lubrication. And, with a Coefficient of Friction nearly 50% lower than our standard product, your cylinders will run smoother and more efficiently than ever. All PowerbandsTM are fully machined with cross-section tolerances of only ±0.001”, chamfered corners, and scarf or angle-cut end gaps. Compared to standard tolerances of ±0.0025”, this tightened tolerance improves the alignment and concentric operation of cylinder rods and pistons. The fully machined chamfered corners will better accommodate cylinder housing grooves, further improving piston and rod alignment. Lastly, the scarf-cut end gap reduces the loss of bearing support that may occur during cylinder side-loading. When combined, these features reduce the tolerance stack-up within the components of the cylinder. As a result, your cylinders will operate more consistently and be capable of operating at higher pressures and higher side loads than with standard wear-ring products. Furthermore, with this improved cylinder operation, your seals will last longer and the life of your cylinder will be extended. PowerbandsTM are currently available in our most popular wear-ring dimensions.
2 3/4 in Nominal Inner Diameter | Powerband
Features
- PowerbandsTM offer a high strength wear-ring for all cylinder applications
- Fully machined with cross-section tolerances of only ±0.001
- Chamfered corners
- Scarf or angle-cut end gaps
PP-35150100A has been machined to fit a 3.5 in cylinder bore and has a 1 in rod hole. The piston length is 1.5 in.
Piston is designed for a Polypak seal.
Matching seal kit is available.
Asymmetric rod seal designed with precision trimmed sealing lips to provide a dry sealing solution in light and medium-duty applications.
The Hallite 605 is molded in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation and excellent low temperature performance.
Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland.
The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.
- Excellent low temperature performance
- Easy installation
Solid Urethane backup ring with a flat cross-section.
95A Durometer | Urethane Material | 1 13/16 in Nominal Inner Diameter | 3/32 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Solid Urethane backup ring with a flat cross-section.
95A Durometer | Urethane Material | 2 3/4 in Nominal Inner Diameter | 3/32 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Wear rings provide a hard-wearing surface that protects the cylinder walls and the piston rod from scoring and abrasion. By maintaining alignment and reducing side loads, these rings facilitate smoother piston movement and lower friction levels.
Nylon Material | 2 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | Wear Ring
Features
- Protection Against Wear
- Reduced Friction
- Extended Cylinder Life
- Operational Efficiency
Fabricated from fine woven fabric and phenolic resins, this wear ring is strong yet light weight with an excellent wear rate.
Phenolic Material | 85 MM Nominal Inner Diameter | Wear Ring
Features
- Protection Against Wear
- Reduced Friction
- Extended Cylinder Life
- Operational Efficiency
Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.
90A Durometer | Fluorocarbon Material | 1 1/2 in Nominal Inner Diameter
Features
- Flexible enough to snap into a groove
- Wipers are constructed of fluorocarbon
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
75 Durometer | Fluorocarbon Material | 3 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -20 °F to -400 °F