Hallite 520 Wiper
View Related Items
Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland.
The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.
ST-500-XL 94A Urethane Wiper Ring | 5 in ID 5 3/4 in OD
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
94A Durometer | Urethane Material | 5 in Nominal Inner Diameter
Features
- Crush lip to provide extra interference
- Bead on the shoulder to keep contaminants out
- Ribbed ID to prevent pressure traps
Item Specifications
-
94A
-
0.374 Inch
-
+0.004, +0.000
-
5.747 Inch
-
+0.006, +0.000
-
Hallite
-
Urethane
-
230 °F
-
-40 °F
-
3/8 Inch
-
5 Inch
-
5 3/4 Inch
-
5 Inch
-
-0.0017, -0.0056
-
5 Years
-
3 ft/sec
-
ST-XL
-
5.493 Inch
-
+0.010, +0.000
-
Extra Lip
-
inch
-
0.11 lbs per EA
View Related Items
Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland.
The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.