Cast Iron Rod Clevis with a 0.5 in Pin Hole
View Related Items
0.5” CLEVIS PIN WITH GROOVES
0.5” CLEVIS PINS WITH HOLES
0.500 3000 PSI NPT PORTS
ORB fittings incorporate a port connection for leak prevention in medium and high pressure hydraulic systems. The female port has a straight thread and a machined surface, along with a chamfer where the o-ring is seated. The seal is created when the o-ring is compressed into the chamfer when mating the male and female connection providing a leak-tight seal.
RC-05 Cast Iron Rod Clevis
Cast Iron Rod Clevis Mount with a 0.4375 in – 20 TPI threaded end and a 0.5 in pin hole.
Clevis mounts help maintain alignment and protect the cylinder from side load. Mounts attach to threaded stud ends, pivot holes, or bolt holes on the cylinder. Can be used with hydraulic cylinders with standard bore sizes.
Export To PDF
Item Specifications
-
0.75 in
-
0.765 in
-
0.5 in
-
1.5 in
-
1 in
-
0.5 in
-
0.5 in
-
1 in
-
0.4375 in - 20 TPI
-
0.75 in
-
Ductile Iron Casting
-
0.45 lbs per PC
View Related Items
0.5” CLEVIS PIN WITH GROOVES
0.5” CLEVIS PINS WITH HOLES
0.500 3000 PSI NPT PORTS
ORB fittings incorporate a port connection for leak prevention in medium and high pressure hydraulic systems. The female port has a straight thread and a machined surface, along with a chamfer where the o-ring is seated. The seal is created when the o-ring is compressed into the chamfer when mating the male and female connection providing a leak-tight seal.
