Browse Categories

PB12-850-100-SC Powerband

SKU: PB12-850-100-SC

PB12-850-100-SC Powerband | 8 1/4 in ID

Hercules® Sealing Products is pleased to introduce our new line of PowerbandTM tight tolerance premium wearrings. Manufactured from a highly engineered blend of premium nylon, glass fiber, and PTFE, PowerbandsTM offer a high strength wear-ring for all cylinder applications, including those with minimal lubrication. And, with a Coefficient of Friction nearly 50% lower than our standard product, your cylinders will run smoother and more efficiently than ever. All PowerbandsTM are fully machined with cross-section tolerances of only ±0.001”, chamfered corners, and scarf or angle-cut end gaps. Compared to standard tolerances of ±0.0025”, this tightened tolerance improves the alignment and concentric operation of cylinder rods and pistons. The fully machined chamfered corners will better accommodate cylinder housing grooves, further improving piston and rod alignment. Lastly, the scarf-cut end gap reduces the loss of bearing support that may occur during cylinder side-loading. When combined, these features reduce the tolerance stack-up within the components of the cylinder. As a result, your cylinders will operate more consistently and be capable of operating at higher pressures and higher side loads than with standard wear-ring products. Furthermore, with this improved cylinder operation, your seals will last longer and the life of your cylinder will be extended. PowerbandsTM are currently available in our most popular wear-ring dimensions.

$43.57 / EA

8 1/4 in Nominal Inner Diameter | Powerband

Features

  • PowerbandsTM offer a high strength wear-ring for all cylinder applications
  • Fully machined with cross-section tolerances of only ±0.001
  • Chamfered corners
  • Scarf or angle-cut end gaps

Item Specifications

  • 20000 psi
  • 34000 psi
  • 275 °F
  • -40 °F
  • 1 Inch
  • 8 1/4 Inch
  • 8 1/2 Inch
  • PB HERCULES®
  • 20000 psi
  • 1/8 Inch
  • 0.19 lbs per EA