60 mm x 80 mm x 10 mm Honed Tube - 1026 Carbon Steel
View Related Items
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
70A Durometer | PTFE Material | 49 MM Nominal Inner Diameter | Piston Seal
Phenolic Material | 55 MM Nominal Inner Diameter | Wear Ring
Urethane Material | 50 MM Nominal Inner Diameter | U-Seal
MHT-60X80 Honed Tube
MHT-60X80 has a wall thickness of 10 mm. The ID is 60 mm and the OD is 80 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
Export To PDF
Item Specifications
-
2.362 in X 3.150 in
-
60 mm
-
1026 Carbon Steel
-
80 mm
-
ASTM A513 Type 5, ST 52.3
-
288 in
-
10 mm
-
0.96 lbs per IN
View Related Items
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
70A Durometer | PTFE Material | 49 MM Nominal Inner Diameter | Piston Seal
Phenolic Material | 55 MM Nominal Inner Diameter | Wear Ring
Urethane Material | 50 MM Nominal Inner Diameter | U-Seal
