5 in Induction Hardened Chrome Shafting
View Related Items
Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland.
The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.
IHCP-5000 Induction Hardened Chrome Shafting
5 in induction hardened chrome shafting.
The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
1-14 | $46.79 |
15-29 | $33.45 |
30-59 | $29.24 |
60-119 | $23.39 |
120+ | $21.29 |
- Greater strength
- Better resistance to mechanical damage
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
Item Specifications
-
0.05 in (1.27 mm)
-
Induction Hardened Chrome
-
0.0005 in (0.0127mm minimum)
-
10%
-
Rc 68-72
-
1045/1050 Carbon Steel
-
ASTM A311, Class B
-
5 in
-
288 in
-
0.006 in TIR per ft
-
Ra 12 max
-
115,000 psi
-
inch
-
100,000 psi
-
5.57 lbs per IN
View Related Items
Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland.
The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.