Urethane Wiper
View Related Items
Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland.
The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.
Nylon Material | 5 in Nominal Inner Diameter | 1/8 in Cross Section | Wear Ring
Bronze Filled PTFE Material | 5 in Nominal Inner Diameter | Buffer Seal
AN-45 90A Urethane Wiper Ring | 5 in ID 5 7/16 in OD
AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 5 in Nominal Inner Diameter
Features
- Flexible, snap-in design for easy installation into closed housings
- Low compression set
Export To PDF
Item Specifications
-
90A
-
0.138 Inch
-
±0.003
-
5.427 Inch
-
+0.004, +0.000
-
90A Urethane
-
Urethane
-
200 °F
-
-40 °F
-
9/64 Inch
-
5 Inch
-
5 7/16 Inch
-
0.238 Inch
-
5 Inch
-
+0.000, -0.003
-
5 Years
-
3 ft/sec
-
AN
-
-65 ºF to +220 ºF
-
0.135 Inch
-
5.24 Inch
-
+0.005, +0.000
-
inch
-
0.02 lbs per EA
View Related Items
Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland.
The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.
Nylon Material | 5 in Nominal Inner Diameter | 1/8 in Cross Section | Wear Ring
Bronze Filled PTFE Material | 5 in Nominal Inner Diameter | Buffer Seal
