Hallite 605 Rod Seal
RTU37-7.75-62 94A Urethane U-Seal | 7 3/4 in ID 3/8 in CS
Asymmetric rod seal designed with precision trimmed sealing lips to provide a dry sealing solution in light and medium-duty applications. The Hallite 605 is molded in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation and excellent low temperature performance. The twin lip design helps solve difficult rod sealing problems by providing lower friction, increased stability, and high, dynamic lip force, while preventing air penetration from outside the cylinder. Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland. The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals.
The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.
94A Durometer | Urethane Material | 7 3/4 in Nominal Inner Diameter | 3/8 in Cross Section | U-Seal
Features
- General purpose rod seal
- Robust design
- Excellent wear resistance
- Increase seal stability
- Performs well over wide temperature range and is extremely effective in low temperatures
- Primary lip protection
- Easy to install
Export To PDF
Item Specifications
-
Rod
-
3/8 Inch
-
94A
-
0.688 Inch
-
+0.010, +0.000
-
8.5 Inch
-
±0.006
-
Unloaded
-
Hallite
-
Hythane® 181
-
Urethane
-
225 °F
-
-40 °F
-
5/8 Inch
-
7 3/4 Inch
-
8 1/2 Inch
-
6,000 psi (10,000 psi with backup ring)
-
0 to 5000 psi
-
7.75 Inch
-
-0.002, -0.006
-
5 Years
-
3 ft/sec
-
RTU Asymmetric Twin Lip Rod
-
-50 to +230 F
-
7.751 Inch
-
+0.003, +0.000
-
inch
-
0.22 lbs per EA
