PSU-2.50X2.12X.375 60D & 57A Urethane Composite Piston Seal | 2 1/8 in ID
SKU:
PSU-2.50X2.12X.375
PSU-2.50X2.12X.375 60D & 57A Urethane Composite Piston Seal | 2 1/8 in ID
Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions – O-rings, O-rings with back-ups, T-seals, U-seals, etc. Piston diameter “I” dimensions are given for pistons without wear rings.
$14.02 / EA
60D & 57A Durometer | Urethane Composite Material | 2 1/8 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Export To PDF
Item Specifications
-
2.5 Inch
-
+0.004, +0.000
-
60D & 57A
-
2.125 Inch
-
+0.004, +0.000
-
0.394 Inch
-
+0.015, +0.000
-
Urethane Composite
-
220 °F
-
-65 °F
-
3/8 Inch
-
2 1/8 Inch
-
2 1/2 Inch
-
2.499 Inch
-
+0.000, -0.004
-
0 to 5000 psi
-
5 Years
-
3 ft/sec
-
PSU
-
inch
-
0.02 lbs per EA
