P250-04.500-SQBV 90A Fluorocarbon U-Seal | 4 1/2 in ID 1/4 in CS
SKU:
P250-04.500-SQBV
P250-04.500-SQBV 90A Fluorocarbon U-Seal | 4 1/2 in ID 1/4 in CS
Utilizing the same profiles as the Style 850 Polyurethane U-Seals, these u-seals are molded from a fluorocarbon compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer to the fluid compatibility chart in the appendix or contact our Engineering Department.
$137.78 / EA
90A Durometer | Fluorocarbon Material | 4 1/2 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal
Export To PDF
Item Specifications
-
Symmetrical
-
5 Inch
-
+0.003, +0.000
-
1/4 Inch
-
90A
-
4.5 Inch
-
+0.000, -0.003
-
0.275 Inch
-
+0.015, +0.000
-
5 Inch
-
+0.003, +0.000
-
Beveled
-
Loaded
-
90A Fluorocarbon
-
Fluorocarbon
-
400 °F
-
-20 °F
-
1/4 Inch
-
4 1/2 Inch
-
5 Inch
-
4.999 Inch
-
+0.000, -0.002
-
2,000 psi
-
0 to 2000 psi
-
4.5 Inch
-
+0.000, -0.002
-
Square
-
Unlimited
-
3 ft/sec
-
850
-
-20 to +400 F
-
4.501 Inch
-
+0.003, +0.000
-
inch
-
0.06 lbs per EA
