Browse Categories

P187-01.750-SQBV 90A Fluorocarbon U-Seal | 1 3/4 in ID 3/16 in CS

SKU: P187-01.750-SQBV

P187-01.750-SQBV 90A Fluorocarbon U-Seal | 1 3/4 in ID 3/16 in CS

Utilizing the same profiles as the Style 850 Polyurethane U-Seals, these u-seals are molded from a fluorocarbon compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer to the fluid compatibility chart in the appendix or contact our Engineering Department.

$49.34 / EA

90A Durometer | Fluorocarbon Material | 1 3/4 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal

Item Specifications

  • Symmetrical
  • 2.125 Inch
  • +0.002, +0.000
  • 3/16 Inch
  • 90A
  • 1.75 Inch
  • +0.000, -0.002
  • 0.207 Inch
  • +0.015, +0.000
  • 2.125 Inch
  • +0.002, +0.000
  • Beveled
  • Loaded
  • Fluorocarbon
  • 400 °F
  • -20 °F
  • 3/16 Inch
  • 1 3/4 Inch
  • 2 1/8 Inch
  • 2.124 Inch
  • +0.000, -0.002
  • 0 to 2000 psi
  • 1.75 Inch
  • +0.000, -0.002
  • Square
  • Unlimited
  • 3 ft/sec
  • 850
  • -20 to +400 F
  • 1.751 Inch
  • +0.002, +0.000
  • inch
  • 0.01 lbs per EA