DRTU12-0.75-25-BHT 94A Urethane U-Seal | 3/4 in ID 1/8 in CS
SKU:
DRTU12-0.75-25-BHT
DRTU12-0.75-25-BHT 94A Urethane U-Seal | 3/4 in ID 1/8 in CS
Style DRTU-BHT rod seals are molded in Freudenberg® AU 30000 urethane. These seals are specifically designed, with a second lip on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing., This feature results in reduced leakage, less friction, increased stability, and prevents air and contaminants from, entering the cylinder. This high tear-resistant urethane demonstrates stability throughout a wide range of temperatures., In addition, this material is well suited to mineral and biodegradable hydraulic fluids as well as being resistant to, hydrolysis.
$12.15 / EA
94A Durometer | Urethane Material | 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal
Features
- General purpose rod seal
- Robust design
- Excellent wear resistance
- Increase seal stability
- Performs well over wide temperature range and is extremely effective in low temperatures
- Primary lip protection
- Easy to install
Item Specifications
-
Rod
-
1/8 Inch
-
94A
-
0.281 Inch
-
+0.015, +0.000
-
1 Inch
-
+0.005, +0.000
-
Urethane
-
0.032 Inch @ 1000 psi
-
0.015 Inch @ 3000 psi
-
0.012 Inch @ 5000 psi
-
0.009 Inch @ 6000 psi
-
250 °F
-
-31 °F
-
1/4 Inch
-
3/4 Inch
-
1 Inch
-
0 to 7250 psi
-
0.75 Inch
-
+0.000, -0.003
-
5 Years
-
1.5 ft/sec
-
DRTU-BHT Heavy Duty Rod
-
0.00 lbs per EA