Mobile Equipment Seal Kits
Search in Category
Filter Your Search
Category Group
Durometer
Material
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Style
Unit of Measure
Shop by Category
Molded in a tough urethane, this seal employs an additional lip near the heel. The twin lip design provides stability, friction-reducing lube retention, and some contaminant resistance. VME – Secondary lip is further from heel than standard MRTU. NOTE: E = European Urethane.
Urethane Material | 90 MM Nominal Inner Diameter | Rod U-Seal
Features
- Excellent low temperature performance
- Easy installation
Molded in a tough urethane, this seal employs an additional lip near the heel. The twin lip design provides stability, friction-reducing lube retention, and some contaminant resistance. VME – Secondary lip is further from heel than standard MRTU. NOTE: E = European Urethane.
Urethane Material | 95 MM Nominal Inner Diameter | Rod U-Seal
Features
- Excellent low temperature performance
- Easy installation
Our premium single-acting polyurethane rod seal incorporates an NBR energizer to seal at low pressures. The twin lip design provides stability and friction-reducing lube retention for dry rod sealing, and the included hard acetal backup ring resists extrusion. MRTUB is capable of pressures up to 10,000 psi in approved applications. E= European Urethane.
94A Durometer | Urethane Material | 40 MM Nominal Inner Diameter | Rod U-Seal
Features
- Excellent low temperature performance
- Easy installation
Molded in a tough urethane, this rod u-seal fits tightly in the groove while providing increased radial force on the rod.
Urethane Material | 22 MM Nominal Inner Diameter | Rod U-Seal
Molded in a tough urethane, this rod u-seal fits tightly in the groove while providing increased radial force on the rod.
Urethane Material | 32 MM Nominal Inner Diameter | Rod U-Seal
Molded in a tough urethane, this rod u-seal fits tightly in the groove while providing increased radial force on the rod.
Urethane Material | 63 MM Nominal Inner Diameter | Rod U-Seal
Molded in a tough urethane, this rod u-seal fits tightly in the groove while providing increased radial force on the rod.
Urethane Material | 65 MM Nominal Inner Diameter | Rod U-Seal
The MRUN Rod U-seal is designed with improved oil resistance and compression set versus urethane seals. The addition of a u-seal back-up ring will increase the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile Material | 40 MM Nominal Inner Diameter | Rod U-Seal
Utilizing tough polyurethane, these seals possess excellent wear and abrasion resistance. Symmetrical in design, they can be used in rod or piston applications. E= European Urethane.
Urethane Material | 100 MM Nominal Inner Diameter | U-Seal
Utilizing tough polyurethane, these seals possess excellent wear and abrasion resistance. Symmetrical in design, they can be used in rod or piston applications. E= European Urethane.
Urethane Material | 140 MM Nominal Inner Diameter | U-Seal
