Mobile Equipment Seal Kits

RB-STL/PTF-75×80×40

These lip-type buffer seals are designed for replacement in Caterpillar® cylinders. The hinged-lip design reduces friction, heat, and wear under low-pressure conditions and acts as a check valve allowing back-pressure relief. Seals for rod sizes 2-1/8” and under do not have a back-up ring.

Urethane Material | 2 3/8 in Nominal Inner Diameter | Buffer Seal

These lip-type buffer seals are designed for replacement in Caterpillar® cylinders. The hinged-lip design reduces friction, heat, and wear under low-pressure conditions and acts as a check valve allowing back-pressure relief. Seals for rod sizes 2-1/8” and under do not have a back-up ring.

Urethane Material | 3 3/4 in Nominal Inner Diameter | Buffer Seal

RUS-90URE-60.00×70.00×6.00

SK-P-UB-10-75.00×110.00

D-Ring-1.494x.195x.134-C/S-90NBR

3 1/4 in Nominal Inner Diameter | Piston Seal

3 1/4 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

50 × 110 mm

3.775X4.525X1.015

The John Deere and New Holland Unitized Pistons are designed to handle a broad range of application parameters. The piston body is machined to exact dimensions and is constructed using four components: a high strength steel body, a non-metallic bearing, a rubber loading ring, and a filled PTFE seal ring. The non-metallic bearing is molded to the piston using a special proprietary process.

Steel Material | Unitized Piston