Mobile Equipment Seal Kits
Search in Category
Filter Your Search
Category Group
Durometer
Material
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Style
Unit of Measure
Shop by Category
Our premium single-acting polyurethane rod seal incorporates an NBR energizer to seal at low pressures. The twin lip design provides stability and friction-reducing lube retention for dry rod sealing, and the included hard acetal backup ring resists extrusion. MRTUB is capable of pressures up to 10,000 psi in approved applications. E= European Urethane.
94A Durometer | Urethane Material | 130 MM Nominal Inner Diameter | Rod U-Seal
Features
- Excellent low temperature performance
- Easy installation
Our premium single-acting polyurethane rod seal incorporates an NBR energizer to seal at low pressures. The twin lip design provides stability and friction-reducing lube retention for dry rod sealing, and the included hard acetal backup ring resists extrusion. MRTUB is capable of pressures up to 10,000 psi in approved applications. E= European Urethane.
Top-of-the-range twin lip rod seal designed to provide a dry sealing solution in heavy-duty applications. The seal’s shell is molded in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation and excellent low temperature performance.
The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland. The unique profile of the NBR energizer ensures the primary sealing lips maintain contact under low or no pressure situations while ensuring proper sealing at higher pressures. The seal also incorporates an acetyl anti-extrusion ring to withstand side loads and extreme pressure peaks even with the extrusion gaps.
94A Durometer | Urethane Material | 160 MM Nominal Inner Diameter | Rod U-Seal
Features
- Excellent low temperature performance
- Easy installation
Incorporating a rubber seal lip, a rubberized fabric heel, and an acetal back-up ring, this seal provides excellent sealability and high extrusion resistance.
80 Durometer | NBR Material | 35 MM Nominal Inner Diameter | Rod U-Seal
Our premium single-acting polyurethane rod seal incorporates an NBR energizer to seal at low pressures. The twin lip design provides stability and friction-reducing lube retention for dry rod sealing, and the included hard acetal backup ring resists extrusion. MRTUB is capable of pressures up to 10,000 psi in approved applications. E= European Urethane.
94A Durometer | Urethane Material | 65 MM Nominal Inner Diameter | Rod U-Seal
Features
- Excellent low temperature performance
- Easy installation
Incorporating a rubber seal lip, a rubberized fabric heel, and an acetal back-up ring, this seal provides excellent sealability and high extrusion resistance.
80 Durometer | NBR Material | 45 MM Nominal Inner Diameter | Rod U-Seal
MUKPN is an asymmetrical single-acting pneumatic piston seal. Molded in nitrile, this seal is resistant to water and most oils while maintaining good low-pressure sealing.
80A Durometer | NBR Material | 145 MM Nominal Inner Diameter | Piston Seal
Molded from 90A nitrile, this seal provides high sealability in a symmetrical design suitable for rods or pistons.
90A Durometer | Nitrile Material | 145 MM Nominal Inner Diameter | U-Seal
Molded from 90A nitrile, this seal provides high sealability in a symmetrical design suitable for rods or pistons.
90A Durometer | Nitrile Material | 40 MM Nominal Inner Diameter | U-Seal
Molded from 90A nitrile, this seal provides high sealability in a symmetrical design suitable for rods or pistons.
90A Durometer | Nitrile Material | 48 MM Nominal Inner Diameter | U-Seal
Molded from 90A nitrile, this seal provides high sealability in a symmetrical design suitable for rods or pistons.
90A Durometer | Nitrile Material | 50 MM Nominal Inner Diameter | U-Seal
