Mobile Equipment Seal Kits

US-90FKM-6×6-1/2×3/8

US-90FKM-7-1/2×8×9/16

US-90URE-8×8-1/2×9/16

US-90URE-1-3/8×2×5/16

Utilizing the same profiles as the Style 800 Polyurethane U-Seal line, these u-seals are molded from a fluorocarbon, compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate, continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer, to the fluid compatibility chart in the appendix or contact our Engineering Department.

95A Durometer | Fluorocarbon Material | 1 3/8 in Nominal Inner Diameter | 5/16 in Cross Section | U-Seal

Utilizing the same profiles as the Style 800 Polyurethane U-Seal line, these u-seals are molded from a fluorocarbon, compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate, continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer, to the fluid compatibility chart in the appendix or contact our Engineering Department.

95A Durometer | Fluorocarbon Material | 3 in Nominal Inner Diameter | 5/16 in Cross Section | U-Seal

US-90URE-2-1/2×3-1/4×3/8

US-90URE-2-3/4×3-1/2×3/8

US-90V-2-3/4×3-1/2×3/8

US-90URE-4-3/8×5-1/8×3/8