Rod Seals
Search in Category
Filter Your Search
Material
Nominal Inner Diameter
Nominal Outer Diameter
Style
Unit of Measure
Shop by Category
MK51 is a polyurethane pneumatic combo seal that is used as both a rod seal and wiper.
92A Durometer | Polyurethane Material | 12 MM Inner Diameter | Wiper
The MPDS is a rubber seal with a fabric-reinforced dynamic surface providing low breakaway and low dynamic friction. An acetal back-up ring is incorporated into the heel to prevent extrusion.
NBR/Neo-Fab Material | 40 MM Nominal Inner Diameter | Rod U-Seal
The MPDS is a rubber seal with a fabric-reinforced dynamic surface providing low breakaway and low dynamic friction. An acetal back-up ring is incorporated into the heel to prevent extrusion.
NBR/Neo-Fab Material | 50 MM Nominal Inner Diameter | Rod U-Seal
The MPDS is a rubber seal with a fabric-reinforced dynamic surface providing low breakaway and low dynamic friction. An acetal back-up ring is incorporated into the heel to prevent extrusion.
NBR/Neo-Fab Material | 90 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile and PTFE Material | 115 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile and PTFE Material | 115 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile and PTFE Material | 120 MM Nominal Inner Diameter | Rod U-Seal
