Rod Seals

These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.

92A Durometer | Urethane Material | 1 5/8 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

The HMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal, with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the, HMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains, a critical sealing edge even though increasing pressure moves the line of contact down toward the heel.

90A Durometer | Fluorocarbon Material | 5/8 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

The HMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal, with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the, HMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains, a critical sealing edge even though increasing pressure moves the line of contact down toward the heel.

92A Durometer | Urethane Material | 5/8 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

The HMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal, with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the, HMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains, a critical sealing edge even though increasing pressure moves the line of contact down toward the heel.

92A Durometer | Urethane Material | 1 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

The HMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal, with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the, HMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains, a critical sealing edge even though increasing pressure moves the line of contact down toward the heel.

80A Durometer | Buna-N Rubber Material | 1 in Nominal Inner Diameter | 5/32 in Cross Section | U-Seal

The HMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal, with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the, HMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains, a critical sealing edge even though increasing pressure moves the line of contact down toward the heel.

90A Durometer | Fluorocarbon Material | 1 in Nominal Inner Diameter | 5/32 in Cross Section | U-Seal

These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.

92A Durometer | Urethane Material | 2 3/8 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.

92A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

Style DRU-BHT rod seals are molded in Freudenberg® AU 30000 urethane. These seals are specifically designed to, seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. This high, tear-resistant urethane demonstrates stability throughout a wide range of temperatures. In addition, this material is well, suited to mineral and biodegradable hydraulic fluids as well as being resistant to hydrolysis.

94A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

Style DRU-BHT rod seals are molded in Freudenberg® AU 30000 urethane. These seals are specifically designed to, seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. This high, tear-resistant urethane demonstrates stability throughout a wide range of temperatures. In addition, this material is well, suited to mineral and biodegradable hydraulic fluids as well as being resistant to hydrolysis.

94A Durometer | Urethane Material | 2 5/8 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal