Rod Seals

This is a single acting rod seal designed for low and high pressure sealing and is commonly found in telescopic, cylinders. The seal consists of a molded rubber sealing lip, rubberized fabric heel, and a polyester header for improved, extrustion resistance.

Rubber Seal Lip Material | 4 3/8 in Nominal Inner Diameter | U-Seal

This is a single acting rod seal designed for low and high pressure sealing and is commonly found in telescopic, cylinders. The seal consists of a molded rubber sealing lip, rubberized fabric heel, and a polyester header for improved, extrustion resistance.

Rubber Seal Lip Material | 6.312 in Nominal Inner Diameter | U-Seal

This is a single acting rod seal designed for low and high pressure sealing and is commonly found in telescopic cylinders., The seal consists of a molded rubber sealing lip, rubberized fabic heel, and an acetal back-up ring for improved extrusion, resistance.

Rubber Seal Lip Material | 5 1/4 in Nominal Inner Diameter | Seal

UKR u-seals are designed to act as a positive sealing, low friction replacement for conventional rubber u-seals. Molded, from polyurethane, UKR u-seals provide long life and high resistance against extrusion. Low friction allows these seals, to run smoothly in a lubricated or non-lucricated cylinder. Available for rod sealing, the flexible dynamic lip provides, very low breakaway friction and steady motion.

90A Durometer | Urethane Material | 3/8 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum, life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability, and, prevents air and contaminants from entering the cylinder.

92A Durometer | Urethane Material | 5/8 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

Features

• General purpose rod seal
• Robust design
• Excellent wear resistance
• Increase seal stability
• Performs well over wide temperature range and is extremely effective in low temperatures
• Primary lip protection
• Easy to install

Style DRTU-BHT rod seals are molded in Freudenberg® AU 30000 urethane. These seals are specifically designed, with a second lip on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing., This feature results in reduced leakage, less friction, increased stability, and prevents air and contaminants from, entering the cylinder. This high tear-resistant urethane demonstrates stability throughout a wide range of temperatures., In addition, this material is well suited to mineral and biodegradable hydraulic fluids as well as being resistant to, hydrolysis.

94A Durometer | Urethane Material | 1 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

Style DRTU-BHT rod seals are molded in Freudenberg® AU 30000 urethane. These seals are specifically designed, with a second lip on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing., This feature results in reduced leakage, less friction, increased stability, and prevents air and contaminants from, entering the cylinder. This high tear-resistant urethane demonstrates stability throughout a wide range of temperatures., In addition, this material is well suited to mineral and biodegradable hydraulic fluids as well as being resistant to, hydrolysis.

94A Durometer | Urethane Material | 1 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal

Features

• General purpose rod seal
• Robust design
• Excellent wear resistance
• Increase seal stability
• Performs well over wide temperature range and is extremely effective in low temperatures
• Primary lip protection
• Easy to install

These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum, life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability, and, prevents air and contaminants from entering the cylinder.

92A Durometer | Urethane Material | 1 3/4 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal

Features

• General purpose rod seal
• Robust design
• Excellent wear resistance
• Increase seal stability
• Performs well over wide temperature range and is extremely effective in low temperatures
• Primary lip protection
• Easy to install

These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum, life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability, and, prevents air and contaminants from entering the cylinder.

92A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter | 7/32 in Cross Section | U-Seal

Features

• General purpose rod seal
• Robust design
• Excellent wear resistance
• Increase seal stability
• Performs well over wide temperature range and is extremely effective in low temperatures
• Primary lip protection
• Easy to install

These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum, life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability, and, prevents air and contaminants from entering the cylinder.

92A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter | 7/32 in Cross Section | U-Seal

Features

• General purpose rod seal
• Robust design
• Excellent wear resistance
• Increase seal stability
• Performs well over wide temperature range and is extremely effective in low temperatures
• Primary lip protection
• Easy to install