O-rings
Filter Your Search
Category Group
Cross Section
Durometer
Material
Nominal Cross Section
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70A Durometer | Nitrile Material | 314.5 MM Nominal Inner Diameter | 8.4 MM Cross Section | O-Ring
Features
- Chemical resistance
- Temperature range of -40 °F to 220 °F
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70A Durometer | Nitrile Material | 319.5 MM Nominal Inner Diameter | 8.4 MM Cross Section | O-Ring
Features
- Chemical resistance
- Temperature range of -40 °F to 220 °F
MOR, 70 NBR 320 X 6-C/S
OR-70NBR-299.5×8.4-C/S
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 101.4 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 106.6 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 148.4 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 156.6 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 15.6 MM Nominal Inner Diameter | Head Seal
Don't see what you need?
Click here to let us know and we'll help you find what you're looking for.
O-rings
An o-ring is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface. O-rings are one of the most common seals used in machine design because they are inexpensive, easy to make, reliable, and have simple mounting requirements.
