Buffer Seals

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.

Bronze Filled PTFE Material | 1 1/2 in Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.

Bronze Filled PTFE Material | 2 in Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.

Bronze Filled PTFE Material | 2 1/4 in Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.

70A Durometer | Filled PTFE Buffer Material | 50 MM Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.

70A Durometer | Filled PTFE Buffer Material | 63 MM Nominal Inner Diameter | Buffer Seal

This U-cup style buffer ring offers an asymmetric sealing lip profile, chamfered sealing edges, and pressure relieving capabilities to prevent inner pressure entrapment when employed in a tandem sealing system. This rod buffer seal is designed to absorb impact pressure fluctuations under high-load conditions thus increasing the life of the primary seal.

Urethane Material | 2 in Nominal Inner Diameter | Buffer Seal

Molded in urethane and employing a back-up, this seal absorbs the shock of pressure spikes to protect the rod seal. The unique design relieves back pressure between the buffer and the rod seal. NOTE: ME = Merkel Equivalent.

Urethane Material | 100 MM Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.

70A Durometer | Filled PTFE Buffer Material | 45 MM Nominal Inner Diameter | Buffer Seal

These lip-type buffer seals are designed for replacement in Caterpillar® cylinders. The hinged-lip design reduces friction, heat, and wear under low-pressure conditions and acts as a check valve allowing back-pressure relief. Seals for rod sizes 2-1/8” and under do not have a back-up ring.

Urethane Material | 1 1/2 in Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.

Bronze Filled PTFE Material | 1 1/4 in Nominal Inner Diameter | Buffer Seal