U-seals, Polypaks, U-cups
Search in Category
Filter Your Search
Category Group
Durometer
Material
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Style
Unit of Measure
Shop by Category
US-90NBR-5-7/16×6×9/32
These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum, life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability, and, prevents air and contaminants from entering the cylinder.
92A Durometer | Urethane Material | 4 1/2 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal
Features
- General purpose rod seal
- Robust design
- Excellent wear resistance
- Increase seal stability
- Performs well over wide temperature range and is extremely effective in low temperatures
- Primary lip protection
- Easy to install
These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum, life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability, and, prevents air and contaminants from entering the cylinder.
92A Durometer | Urethane Material | 5 1/2 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal
Features
- General purpose rod seal
- Robust design
- Excellent wear resistance
- Increase seal stability
- Performs well over wide temperature range and is extremely effective in low temperatures
- Primary lip protection
- Easy to install
These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.
92A Durometer | Urethane Material | 2 1/8 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal
These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.
92A Durometer | Urethane Material | 4 in Nominal Inner Diameter | 3/8 in Cross Section | U-Seal
Style HU seals feature a reverse bevel lip design and are molded from high quality urethane. The balanced symmetrical design makes them ideal for rod or piston applications.
90A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal
The HMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal, with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the, HMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains, a critical sealing edge even though increasing pressure moves the line of contact down toward the heel.
92A Durometer | Urethane Material | 3 in Nominal Inner Diameter | 7/32 in Cross Section | U-Seal
