U-seals, Polypaks, U-cups

US-90URE-3-1/8×3-1/2×3/8

US-90URE-3-1/8×3-1/2×3/8

US-90URE-3-1/8×3-1/2×3/16

Our Style 800 orange Hytrel U-seals offer superior resistance to abrasion, extrusion, and heat. As a drop-in replacement, for our standard Style 800 U-seals, they can prolong equipment life under today’s increased demands. These seals are, suitable for both petroleum-based and water-based fluids.

55D Durometer | Hytrel Material | 3 1/8 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal

US-90URE-3-1/2×3-7/8×3/16

US-90URE-3-5/8×4×3/16

Utilizing the same profiles as the Style 800 Polyurethane U-Seal line, these u-seals are molded from a fluorocarbon, compound. While being compatible with a broader range of fluids, these fluorocarbon seals will also operate, continuously at temperatures from -20° to +400 °F. NOTE: If you are not sure of fluid/seal compatibility, please refer, to the fluid compatibility chart in the appendix or contact our Engineering Department.

95A Durometer | Fluorocarbon Material | 3 5/8 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal

US-90URE-3-3/4×4-1/8×3/8

US-90URE-3-7/8×4-1/4×3/8

US-90URE-4×4-3/8×3/16