U-seals, Polypaks, U-cups
Search in Category
Filter Your Search
Category Group
Durometer
Material
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Style
Unit of Measure
Shop by Category
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile And PTFE Material | 70 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile And PTFE Material | 70 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile and PTFE Material | 70 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile And PTFE Material | 75 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile and PTFE Material | 80 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile And PTFE Material | 85 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile And PTFE Material | 90 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile And PTFE Material | 90 MM Nominal Inner Diameter | Rod U-Seal
The MRUNB Rod U-seal is designed to prevent extrusion damage. The addition of the u-seal back-up ring increases the pressure range of the seal from 2,000 psi to 3,000 psi.
Nitrile and PTFE Material | 95 MM Nominal Inner Diameter | Rod U-Seal
With redundant nitrile lips and an acetal back-up, this seal features high sealability and extrusion resistance.
NBR Material | 100 MM Nominal Inner Diameter | Rod Seal
Features
- Excellent low temperature performance
- Easy installation
