Retaining Rings

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.186 in Nominal Inner Diameter | 0.092 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.05 in Nominal Inner Diameter | 0.1 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.52 in Nominal Inner Diameter | 0.125 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.686 in Nominal Inner Diameter | 0.092 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

3.14 in Nominal Inner Diameter | 0.18 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

3.641 in Nominal Inner Diameter | 0.137 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.93 in Nominal Inner Diameter | 0.128 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.966 in Nominal Inner Diameter | 0.147 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

3.92 in Nominal Inner Diameter | 0.15 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

These rings are split for ease of installation and are retained in a groove. Their use is primarily to retain single acting piston seals. Commonly used with UFN style piston seals.

Acetal Material | 1.211 in Nominal Inner Diameter | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment