Retaining Rings

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.594 in Nominal Inner Diameter | 0.118 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.127 in Nominal Inner Diameter | 0.074 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

1.932 in Nominal Inner Diameter | 0.092 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

1.92 in Nominal Inner Diameter | 0.128 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.063 in Nominal Inner Diameter | 0.125 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.032 in Nominal Inner Diameter | 0.078 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.186 in Nominal Inner Diameter | 0.092 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.05 in Nominal Inner Diameter | 0.1 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.52 in Nominal Inner Diameter | 0.125 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

2.686 in Nominal Inner Diameter | 0.092 in Cross Section | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment