Backup Rings
Search in Category
Filter Your Search
Category Group
Material
Nominal Cross Section
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
Backup rings are used in sealing and are designed to limit o-ring clearance gaps. They are used in high-pressure sealing situations.
70 Shore D Durometer | Urethane Material | 126 MM Nominal Inner Diameter | 4.9 MM Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 124 MM Nominal Inner Diameter | Piston Seal
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 129 MM Nominal Inner Diameter | Piston Seal
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 139 MM Nominal Inner Diameter | Piston Seal
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 144 MM Nominal Inner Diameter | Piston Seal
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 164 MM Nominal Inner Diameter | Piston Seal
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 174 MM Nominal Inner Diameter | Piston Seal
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 184 MM Nominal Inner Diameter | Piston Seal
Placed in adjacent grooves on each side of style MPS piston seals, they prevent cold flow or extrusion at high pressures.
Nylon Material | 209 MM Nominal Inner Diameter | Piston Seal
Backup rings are used in sealing and are designed to limit o-ring clearance gaps. They are used in high-pressure sealing situations.
95A Durometer | Urethane Material | 145 MM Nominal Inner Diameter | 5 MM Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
