Snap-in Wipers for Sale | CRC Distribution
Search in Category
Filter Your Search
Shop by Category
The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.
The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.
55D Durometer | Polyester Material | 70 MM Inner Diameter | Wiper
Features
- Crush lip design provides effective seal on housing
- Ribs relieve pressure and improve stability
- Effective scraping lip to scrape off heavily deposited containments including ice
The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.
The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.
55D Durometer | Polyester Material | 70 MM Inner Diameter | Wiper
Features
- Crush lip design provides effective seal on housing
- Ribs relieve pressure and improve stability
- Effective scraping lip to scrape off heavily deposited containments including ice
The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.
55D Durometer | Polyester Material | 75 MM Inner Diameter | Wiper
Molded in nitrile, this double lipped wiper is common in Toyota lift trucks.
Nitrile Material | 35 MM Inner Diameter | Wiper
Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.
90A Durometer | Urethane Material | 1.075 in Nominal Inner Diameter
Features
- Flexible enough to snap into a groove
- Wipers are constructed of fluorocarbon
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
94A Durometer | Urethane Material | 11 in Nominal Inner Diameter
Features
- Crush lip to provide extra interference
- Bead on the shoulder to keep contaminants out
- Ribbed ID to prevent pressure traps
Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.
90A Durometer | Fluorocarbon Material | 1 1/4 in Nominal Inner Diameter
Features
- Flexible enough to snap into a groove
- Wipers are constructed of fluorocarbon
Style ST-XL-PM wipers are molded from 55D polyester and are direct replacements for Style “ST”, “ST-XL” or “D” wipers. The polyester based material provides a tough abrasion resistant wiper for heavy contaminant environments. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
55D Durometer | Polyester Material | 1 1/2 in Nominal Inner Diameter
Features
- Molded from 55D polyester
- The outside diameter of the ring has a crush lip providing extra interference in the groove
- The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal
Single-lipped, snap-in rod wiper is designed to fit D-style housings.
The ST-XLF wipers are designed to fit the standard ST wiper groove. These wipers include a dust lip to prevent contaminates from entering through the groove. They also have a ribbed inside diameter for low friction operation and to prevent pressure traps between the wiper and rod seal. Developed specifically for use in harsher environments with heavy contamination, such as in agriculture, off-highway, and forestry equipment.
Urethane Material | 1 1/2 in Nominal Inner Diameter
Features
- Precision trimmed wiping lip
- Retrofits most ‘D’ wiper housings
- Especially effective in vertically mounted cylinders
- Designed to follow the rod deflection caused by side loads
- Interchangeable with Hallite 520 wiper
- Sharp wiping lip scrapes heavy contamination from rod protecting sealing system
- Umbrella Wiper Technology™ protects housing from contamination and reduces moisture ingress