Metal Wipers for Sale | CRC Distribution

This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.

Nitrile Material | 60 MM Nominal Inner Diameter | Wiper

This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.

Nitrile Material | 75 MM Nominal Inner Diameter | Wiper

This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.

Nitrile Material | 75 MM Nominal Inner Diameter | Wiper

Molded from high grade urethane and bonded to a carbon steel case, this wiper utilizes a stainless steel finger spring to maintain a high radial force on the rod.

Urethane Material | 40 MM Nominal Inner Diameter | Wiper

Molded from high grade urethane and bonded to a carbon steel case, this wiper utilizes a stainless steel finger spring to maintain a high radial force on the rod.

Urethane Material | 45 MM Nominal Inner Diameter | Wiper

Molded from high grade urethane and bonded to a carbon steel case, this wiper utilizes a stainless steel finger spring to maintain a high radial force on the rod.

Urethane Material | 70 MM Nominal Inner Diameter | Wiper

Molded from high grade urethane and bonded to a carbon steel case, this wiper utilizes a stainless steel finger spring to maintain a high radial force on the rod.

Urethane Material | 80 MM Nominal Inner Diameter | Wiper

Buna-N Material | 2 1/2 in Nominal Inner Diameter | Wiper

Buna-N Material | 2 1/2 in Nominal Inner Diameter | Wiper

Each Seal Guard Wiper consists of two flexible bronze rings which are held in place by a nitrile cushion ring. The cushion ring absorbs side loads and energizes the wiper to maintain close contact with the rod. Particularly suited for hostile environments, seal guard wipers shave off sand, grift, slag, flux, paint, moisture, chips and slivers. Seal Guard Wipers are long-lasting, self-adjusting, and offer low friction. Seal Guard Wipers can be installed in standard Hercules® Sealing Products “ST” or “D” Style grooves by increasing the “F” gland dimension to the “F” Throat Diameter shown.

70A Durometer | 660 Bronze; Nitrile Material | 1/2 in Nominal Inner Diameter | Wiper

Each Seal Guard Wiper consists of two flexible bronze rings which are held in place by a nitrile cushion ring. The cushion ring absorbs side loads and energizes the wiper to maintain close contact with the rod. Particularly suited for hostile environments, seal guard wipers shave off sand, grift, slag, flux, paint, moisture, chips and slivers. Seal Guard Wipers are long-lasting, self-adjusting, and offer low friction. Seal Guard Wipers can be installed in standard Hercules® Sealing Products “ST” or “D” Style grooves by increasing the “F” gland dimension to the “F” Throat Diameter shown.

70A Durometer | 660 Bronze; Nitrile Material | 5/8 in Nominal Inner Diameter | Wiper