Metal Wipers for Sale | CRC Distribution

RW-20MM Seal guard wiper

Each Seal Guard Wiper consists of two flexible bronze rings which are held in place by a nitrile cushion ring. The cushion ring absorbs side loads and energizes the wiper to maintain close contact with the rod. Particularly suited for hostile environments, seal guard wipers shave off sand, grift, slag, flux, paint, moisture, chips and slivers. Seal Guard Wipers are long-lasting, self-adjusting, and offer low friction. Seal Guard Wipers can be installed in standard Hercules® Sealing Products “ST” or “D” Style grooves by increasing the “F” gland dimension to the “F” Throat Diameter shown.

70A Durometer | 660 Bronze; Nitrile Material | 1 1/8 in Nominal Inner Diameter | Wiper

Each Seal Guard Wiper consists of two flexible bronze rings which are held in place by a nitrile cushion ring. The cushion ring absorbs side loads and energizes the wiper to maintain close contact with the rod. Particularly suited for hostile environments, seal guard wipers shave off sand, grift, slag, flux, paint, moisture, chips and slivers. Seal Guard Wipers are long-lasting, self-adjusting, and offer low friction. Seal Guard Wipers can be installed in standard Hercules® Sealing Products “ST” or “D” Style grooves by increasing the “F” gland dimension to the “F” Throat Diameter shown.

70A Durometer | 660 Bronze; Nitrile Material | 1 3/4 in Nominal Inner Diameter | Wiper

RWS, 4 1/2 X 5 1/4 X 3/8 Seal-Guard NBR

RWS, 5 X 5 3/4 X 3/8 Seal-Guard NBR

RW, 5 1/2 X 6 1/4 X 3/8 BUNA SEAL GUARD

This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.

Nitrile Material | 28 MM Nominal Inner Diameter | Wiper

Molded from high grade urethane and bonded to a carbon steel case, this wiper utilizes a stainless steel finger spring to maintain a high radial force on the rod.

Urethane Material | 56 MM Nominal Inner Diameter | Wiper

Style AN-M2 scrapers conform to MS28776-M2 sizes and are manufactured in brass. The scrapers are suitable for extreme environments with aggressive contaminants. The unique spring-loaded construction and ductile material result in close rod contact even when coping with rod ovality and helix grinding patterns.

Brass Material | 1 3/4 in Nominal Inner Diameter

Features

• Scrapers are suitable for extreme environments with aggressive contaminants
• Unique spring-loaded construction
• Manufactured in brass

This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.

Nitrile Material | 45 MM Nominal Inner Diameter | Wiper