Metal Wipers for Sale | CRC Distribution
Search in Category
Filter Your Search
Category Group
Material
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.
Urethane Material | 38 MM Nominal Inner Diameter | Wiper
This wiper is molded from high grade urethane and bonded to a carbon steel case in a single lip design.
Urethane Material | 60 MM Nominal Inner Diameter | Wiper
This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.
Urethane Material | 80 MM Nominal Inner Diameter | Wiper
Molded from high grade urethane and bonded to a carbon steel case, this wiper utilizes a stainless steel finger spring to maintain a high radial force on the rod.
Urethane Material | 50 MM Nominal Inner Diameter | Wiper
Each Seal Guard Wiper consists of two flexible bronze rings which are held in place by a nitrile cushion ring. The cushion ring absorbs side loads and energizes the wiper to maintain close contact with the rod. Particularly suited for hostile environments, seal guard wipers shave off sand, grift, slag, flux, paint, moisture, chips and slivers. Seal Guard Wipers are long-lasting, self-adjusting, and offer low friction. Seal Guard Wipers can be installed in standard Hercules® Sealing Products “ST” or “D” Style grooves by increasing the “F” gland dimension to the “F” Throat Diameter shown.
70A Durometer | 660 Bronze; Nitrile Material | 1 1/4 in Nominal Inner Diameter | Wiper
Each Seal Guard Wiper consists of two flexible bronze rings which are held in place by a nitrile cushion ring. The cushion ring absorbs side loads and energizes the wiper to maintain close contact with the rod. Particularly suited for hostile environments, seal guard wipers shave off sand, grift, slag, flux, paint, moisture, chips and slivers. Seal Guard Wipers are long-lasting, self-adjusting, and offer low friction. Seal Guard Wipers can be installed in standard Hercules® Sealing Products “ST” or “D” Style grooves by increasing the “F” gland dimension to the “F” Throat Diameter shown.
70A Durometer | 660 Bronze; Nitrile Material | 1 3/4 in Nominal Inner Diameter | Wiper
RWS, 2 3/4 X 3 1/4 X 1/4 Seal-Guard FKM
Utilizing a double lip of nitrile bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
80A Durometer | Nitrile Material | 55 MM Nominal Inner Diameter | Wiper
Rubber Material | 1 in Nominal Inner Diameter | Wiper
Rubber Material | 1 in Nominal Inner Diameter | Wiper
