Vee Sets

These vee sets utilize hytrel & nylon vees to cover pressure from 0 to 6,000 psi and provide excellent extrusion resistance. Male & female bearings are molded from glass filled nylon.

Hytrel & Nylon Material | 7 1/2 in Nominal Inner Diameter | VEE Packing Set

Features

• hytrel & nylon vees to cover pressure from 0 to 6,000 psi
• Excellent extrusion resistance

These vee sets utilize hytrel & nylon vees to cover pressure from 0 to 6,000 psi and provide excellent extrusion resistance. Male & female bearings are molded from glass filled nylon.

Hytrel & Nylon Material | 3 in Nominal Inner Diameter | VEE Packing Set

Features

• hytrel & nylon vees to cover pressure from 0 to 6,000 psi
• Excellent extrusion resistance

Fabric/Rubber Material | 100 MM Nominal Inner Diameter | VEE Packing

Fabric/Rubber Material | 100 MM Nominal Inner Diameter | VEE Packing

Fabric/Rubber Material | 160 MM Nominal Inner Diameter | VEE Packing

Fabric/Rubber Material | 160 MM Nominal Inner Diameter | VEE Packing

Fabric/Rubber Material | 30 MM Nominal Inner Diameter | VEE Packing

Fabric/Rubber Material | 30 MM Nominal Inner Diameter | VEE Packing

Fabric/Rubber Material | 60 MM Nominal Inner Diameter | VEE Packing

Fabric/Rubber Material | 60 MM Nominal Inner Diameter | VEE Packing

Our vee sets are the finest quality available in the industry. While all sets incorporate fabric reinforced rubber pressure rings, one or two urethane rings are included to improve low pressure sealing, when it is feasible. Most sets use nylon adaptors.

Fabric Reinforced Rubber Material | 5 in Nominal Inner Diameter | Packing Set

Features

• Use nylon adaptors
• Low pressure sealing

These vee sets utilize hytrel & nylon vees to cover pressure from 0 to 6,000 psi and provide excellent extrusion resistance. Male & female bearings are molded from glass filled nylon.

Hytrel & Nylon Material | 2 1/2 in Nominal Inner Diameter | VEE Packing Set

Features

• hytrel & nylon vees to cover pressure from 0 to 6,000 psi
• Excellent extrusion resistance

Employed mainly in cylinders made by Cascade Corp., these vee sets are often over-sized or are different from standard vee sets. They are often used with Follower bearings

Fabric Reinforced Rubber & Urethane Material | 2 1/2 in Nominal Inner Diameter | Cascade VEE Set

Features

• 3,000 psi = 4 vees
• 5,000 psi = 5 vees
• 10,000 psi= 6 veees

Used in Cascade cylinders. Often used with follower bearings.

NOTE: Often oversized or are different from standard vee sets.

• 3,000 psi = 4 vees
• 5,000 psi = 5 vees
• 10,000 psi= 6 veees