Vee Sets

Our vee sets are the finest quality available in the industry. While all sets incorporate fabric reinforced rubber pressure rings, one or two urethane rings are included to improve low pressure sealing, when it is feasible. Most sets use nylon adaptors.

Fabric Reinforced Rubber Material | 3 1/2 in Nominal Inner Diameter | Packing Set

Features

• Use nylon adaptors
• Low pressure sealing

Our vee sets are the finest quality available in the industry. While all sets incorporate fabric reinforced rubber pressure rings, one or two urethane rings are included to improve low pressure sealing, when it is feasible. Most sets use nylon adaptors.

Fabric Reinforced Rubber Material | 3.97 in Nominal Inner Diameter | Packing Set

Features

• Use nylon adaptors
• Low pressure sealing

Molded from glass filled nylon, these step-cut bearings also act as retainers for Hydrolock vee sets.

1 3/8 in Nominal Inner Diameter | Piston Bearing

Molded from glass filled nylon, these step-cut bearings also act as retainers for Hydrolock vee sets.

2 1/4 in Nominal Inner Diameter | Piston Bearing

Molded from glass filled nylon, these step-cut bearings also act as retainers for Hydrolock vee sets.

3 1/4 in Nominal Inner Diameter | Piston Bearing

Molded from glass filled nylon, these step-cut bearings also act as retainers for Hydrolock vee sets.

4 5/8 in Nominal Inner Diameter | Piston Bearing

Molded from glass filled nylon, these step-cut bearings also act as retainers for Hydrolock vee sets.

6 5/8 in Nominal Inner Diameter | Piston Bearing

These vee sets utilize hytrel & nylon vees to cover pressure from 0 to 6,000 psi and provide excellent extrusion resistance. Male & female bearings are molded from glass filled nylon.

Hytrel & Nylon Material | 3 1/2 in Nominal Inner Diameter | VEE Packing Set

Features

• hytrel & nylon vees to cover pressure from 0 to 6,000 psi
• Excellent extrusion resistance

These vee sets utilize hytrel & nylon vees to cover pressure from 0 to 6,000 psi and provide excellent extrusion resistance. Male & female bearings are molded from glass filled nylon.

Hytrel & Nylon Material | 3 3/4 in Nominal Inner Diameter | VEE Packing Set

Features

• hytrel & nylon vees to cover pressure from 0 to 6,000 psi
• Excellent extrusion resistance

These vee sets utilize hytrel & nylon vees to cover pressure from 0 to 6,000 psi and provide excellent extrusion resistance. Male & female bearings are molded from glass filled nylon.

Hytrel & Nylon Material | 4 1/2 in Nominal Inner Diameter | VEE Packing Set

Features

• hytrel & nylon vees to cover pressure from 0 to 6,000 psi
• Excellent extrusion resistance